goot充氣烙鐵GP-501
- Heats quickly. Takes only 30 seconds from ignition until soldering. Controls equivalent power of 25-125W with the temperature adjuster.
- Can be used as a blow torch by removing the tip. With optional tips, do soldering work for large metal or precision PCBs, or use as a hot knife or a hot air tool.
- Operates approx. 45 minutes between refills (when used at max. temperature as a soldering iron).
- One-handed, one-touch ignition switch.
goot充氣烙鐵GP-510
- Heats quickly. Takes only 30 seconds from ignition until soldering. Controls equivalent power of 15-75W with the temperature adjuster.
- Optional tip converts it to a hot knife or other hot air tools.
- Operates approx. 45 minutes between refills (when used at max. temperature as a soldering iron).
- One-handed, one-touch ignition switch.
- NOTE: Fill with gas before use.
- GP-510ST:Must be used with the GP-510HT.
goot可調溫度電洛鐵PX-201
- 70W high-powered heater
- Temperature setting screw for analog adjustment 250-450°C
- Ceramic heater’s internal sensor gives accurate control of tip temperature
- Ideal for soldering electronic components
- Ergonomic grip keeps you comfortable
- Heat-resistant cap for quick storage
- Suitable for hobbyists and professionals
goot吸錫器GS-100
- Large vacuum capacity
- When the plunger is pushed, a piston extends out the nozzle. This prevents solder build-up.
- The plunger can be stored inside the shaft by pushing it in completely, and pressing the vacuum release button, Compact storage.
goot吸錫器GS-108
When the plunger is pushed, a piston extends out the nozzle. This prevents solder build-up.
goot吸錫器GS-108
When the plunger is pushed, a piston extends out the nozzle. This prevents solder build-up.
goot小型溫控器型電烙鐵PX-501
- Reaches set temperature fast with the Quick Start circuit.
- Temperature adjustable 250-450°C
- Solder melted consecutively on 5mm-dia land. Approx. 2 sec/land.
goot槍形快熱電鉻鐵TQ-77
- Two-Stage Heat-Switch System.
- High power runs while trigger/quick button is pressed.
goot槍形快熱電鉻鐵TQ-77
- Two-Stage Heat-Switch System.
- High power runs while trigger/quick button is pressed.
goot氣體烙鐵GP-101S
- Compact gas soldering iron.
- Heats quickly. Takes only 30 seconds from ignition until soldering.
- Controls equivalent power of 10-60W with the temperature adjuster (at max temperature 480°C).
- NOTE: Fill with gas before use. NOTE: Fill with gas before use.
goot氣體烙鐵GP-101S
- Compact gas soldering iron.
- Heats quickly. Takes only 30 seconds from ignition until soldering.
- Controls equivalent power of 10-60W with the temperature adjuster (at max temperature 480°C).
- NOTE: Fill with gas before use. NOTE: Fill with gas before use.
goot烙鐵CS-21
- Easy to hold slim grip.
- Perfect for precision soldering. Slim and sharp tips.
- Ceramic heater and lower priced tips.
- Hex wrench (opposite side: 1.5 mm) is required to replace the soldering tip.
goot烙鐵CS-21
- Easy to hold slim grip.
- Perfect for precision soldering. Slim and sharp tips.
- Ceramic heater and lower priced tips.
- Hex wrench (opposite side: 1.5 mm) is required to replace the soldering tip.
goot烙鐵CS-31
- Easy to hold slim grip.
- Perfect for precision soldering. Slim and sharp tips.
- Ceramic heater and lower priced tips.
- Hex wrench (opposite side: 1.5 mm) is required to replace the soldering tip.
goot烙鐵CS-31
- Easy to hold slim grip.
- Perfect for precision soldering. Slim and sharp tips.
- Ceramic heater and lower priced tips.
- Hex wrench (opposite side: 1.5 mm) is required to replace the soldering tip.
goot烙鐵嘴GP-101T-1C
- Effective iron tip length: 1.4 inches (36 mm)
- Tip Diameter: 0.04 inches (1.0 mm)
- Replacement soldering iron tip
- Compatible models: GP-101S
- RoHS 2 compliant